Description

Ceramicspeed PF30a Shimano

The unique PF30A shell is 73mm wide, 46mm diameter. These cups and bearings adapt the shell so it is compatible with Shimano, FSA, and others.

0.3-.04 watts of frictional drag is the “cost” of our CeramicSpeed Standard Bearings. That’s a reduction in drag of 75% compared to stock bottom brackets. This is the result of great design: hardened-steel races combined with CeramicSpeed Balls that are 100% smoother and 15% harder than the ceramic competition. They also last longer.

The CeramicSpeed Coated Bearings last even longer and feature even lower drag. Life increases by 60% and drag drops by 50% compared to our CeramicSpeed Standard Bearings.

All Round Grease comes pre-installed in the bearings. It can be replaced for lower drag TT and Track Grease, or higher durability LongLife Grease, which adds a bit of drag but stays in when riding through messy conditions.

PF30A is a Cannondale-specific standard for their 73mm wide bottom bracket shells. This CeramicSpeed kit makes it possible to install Shimano and other 24mm diameter thru-axle cranks into a Cannondale frame.

CeramicSpeed Bearings come installed in two cups and are connected through the shell via a spacer tube. There are versions with Standard and Coated Bearings. Both have super round CeramicSpeed Balls and hardened-steel races. The CeramicSpeed Coated have an additional attribute: a 3-micron thick metallic layer over the races. This addition makes the races harder and smoother, lowering drag and increasing life.

In The Box
-2 CeramicSpeed bearings pressed into cups.
-2 installed dust covers.
-Spacer tube.
-10mm syringe of All Round Grease.
-Installation tool.
-Sticker Sheet.

#ceramicspeed

https://www.facebook.com/ligamascycle/
https://www.instagram.com/ligamascycle/

http://www.wasap.my/60123402990
#giantbicyclesligamascycle
#ligamascycle #rawang
#ligamascycle #batangkali